A 2 ton Rheem air conditioner price varies by model, SEER, installation complexity and region. Homeowners typically pay $2,800-$6,500 total for unit plus standard installation; higher-efficiency models and long refrigerant runs push costs up.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 2 Ton Rheem Split AC (unit + install) | $2,800 | $4,200 | $6,500 | Assumptions: 2-story suburban home, 15-25 ft line run, standard ductwork, SEER 14-16. |
Typical Total Price For A 2 Ton Rheem AC System
Most homeowners pay $2,800-$6,500 for a new 2 ton Rheem split system including basic install; average is about $4,200. Price depends on model (e.g., Classic vs. Prestige), SEER rating, and whether air handler or coil is included.
Assumptions: Midwest labor rates, standard materials, normal access.
Breakdown Of Materials, Labor, Equipment, And Disposal
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (unit, coil, refrigerant) | $1,200 | $2,200 | $4,000 | Higher SEER models cost more |
| Labor (installation) | $800 | $1,400 | $2,200 | Typical 8-16 hours |
| Equipment (crane/scaffold) | $0 | $150 | $1,000 | Required for tight rooftop access |
| Permits & Codes | $50 | $150 | $500 | Local building permit and inspection fees |
| Delivery / Disposal | $75 | $200 | $600 | Old unit disposal and refrigerant recovery |
The materials and labor line items typically form 70%-90% of the final invoice for a 2 ton Rheem installation.
How SEER Rating, Line Length, And Duct Condition Change Price
SEER: moving from SEER 14 to SEER 16 typically adds $300-$900; SEER 18+ adds $800-$2,000. Higher-efficiency models have higher upfront price but lower operating costs.
Line set length: a short run (0-25 ft) usually included; extra $75-$200 per additional 25 ft. Long runs >50 ft often require more refrigerant and labor, adding $250-$800.
Ductwork: if ducts need sealing or modification, expect $300-$1,500 depending on scope; full duct replacement is $2,000-$6,000.
Practical Ways To Reduce The 2 Ton Rheem Installation Price
Choose a lower SEER if immediate budget matters: SEER 14-15 saves $500-$1,200 vs. SEER 18. Opt for replacing only the outdoor condenser and match to existing coil when compatible to cut material cost.
Schedule in off-peak season (fall or spring) to get lower labor rates and faster scheduling; comparing 3-5 local quotes typically reduces price by 8%-20%.
Prepare the site: clear access, remove obstacles, and ensure attic/crawlspace access to reduce crew time charges.
Regional Price Differences For A 2 Ton Rheem Across The U.S.
Prices vary by region: Northeast and West Coast typically run 10%-25% higher than Midwest averages; rural areas may be 5%-15% lower but add travel fees. Expect $3,700-$5,200 average in coastal metro areas vs. $3,200-$4,200 in interior metro areas.
| Region | Typical Average | Delta vs. Midwest |
|---|---|---|
| Midwest | $4,200 | Baseline |
| Northeast (urban) | $4,600-$5,200 | +10% to +25% |
| South | $3,400-$4,400 | -5% to +5% |
| West Coast | $4,800-$6,000 | +15% to +40% |
Typical Installation Time, Crew Size, And Labor Rates
Installation time: 6-12 hours for a straightforward swap; complex jobs 12-20 hours. Crew size: 2 technicians for standard installs; 3-4 if equipment lift or ductwork required. Expect labor rates of $75-$125 per hour depending on market and technician skill level.
Sample formula: total_labor_cost = labor_hours × hourly_rate.
Common Add-Ons, Permits, And Removal Fees To Budget For
Typical add-ons: smart thermostat $100-$350, surge protector $150-$400, optional mounting pad or curb $50-$300. Allow $100-$350 for refrigerant top-up if lines are long or older equipment used.
Permit/inspection fees often $50-$300; expedited or specialty permits can be $300-$700. Old-unit disposal and refrigerant recovery is commonly $75-$250 but can reach $400 for commercial-sized refrigerant charges.
Three Real-World Quotes: Specs, Labor Hours, And Totals
| Example | Specs | Labor Hours | Total |
|---|---|---|---|
| Budget Swap | Rheem 2 ton SEER 14, reuse coil, 10 ft line | 8 | $2,800 |
| Standard Install | Rheem 2 ton SEER 16, new coil, 25 ft line, minor duct sealing | 12 | $4,250 |
| Premium | Rheem 2 ton SEER 18, new coil, 60 ft line, crane lift, thermostat | 18 | $6,500 |
Use these examples to compare quotes by checking unit model, included accessories, labor hours, and line-set length.