Buyers in Utah typically pay $3,200-$9,800 for a complete AirTemp HVAC split-system install; the final AirTemp price depends on unit size, SEER rating, ductwork condition, and local labor. Assumptions: standard 1,800–2,400 sq ft home, normal access, single-story, permit required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| AirTemp AC + Furnace Full Replace | $3,200 | $6,100 | $9,800 | Includes mid-efficiency furnace, 14–16 SEER AC, basic thermostat |
| AirTemp AC Only (condensing + coil) | $1,900 | $3,600 | $6,000 | Per 2–3 ton unit; excludes duct changes |
| AirTemp Furnace Only | $1,200 | $2,500 | $4,500 | 80%–95% AFUE; includes venting |
| Service Call / Diagnostic | $75 | $120 | $250 | Depends on company and emergency status |
Typical AirTemp Furnace And AC Prices In Utah
Single‑stage AirTemp 80% AFUE furnace replacement typically costs $1,200-$2,200; mid-efficiency 95% units run $1,800-$3,800. Combined condenser + air handler split systems from AirTemp for a 2–3 ton home average $3,600.
High-efficiency systems (16–18 SEER and modulating furnaces) push total installed price to $7,000-$9,800. Assumptions: standard duct layout, 2–3 ton cooling capacity, Salt Lake metro labor.
Breakdown Of Materials, Labor, Equipment, And Permits
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,000 | $2,800 | $6,200 | Unit, coil, filters, thermostat |
| Labor | $800 | $1,800 | $3,600 | Typical rate $75-$125 per hour |
| Equipment | $0 | $250 | $900 | Hoisting, scaffolding, vacuum pump rental |
| Permits | $50 | $200 | $800 | Local building and mechanical permits |
| Delivery/Disposal | $50 | $200 | $600 | Old unit disposal and transport |
Materials and labor together typically represent 75%–90% of the total installed AirTemp price.
How Unit Size And SEER Rating Affect Final Quotes
AirTemp pricing moves primarily with tonnage and SEER: 1.5–2 ton units cost $1,900-$3,200; 2.5–3.5 ton units cost $3,200-$5,500. Each additional SEER point above 13–14 usually adds $200-$600 to the unit price.
Furnace AFUE rating changes cost: 80% AFUE is the low end, 92%–98% (condensing) adds $600-$1,600 depending on venting and condensate handling. Assumptions: residential split systems, typical single-family home.
Practical Ways To Lower An AirTemp Installation Price
Opt for a matched mid-efficiency 14–15 SEER AirTemp system instead of top-tier SEER to save $800-$2,500 up front. Keeping existing ductwork and only replacing the outdoor condensing unit and coil can reduce the project cost by 30% or more.
Schedule work in spring or fall to avoid peak summer rush rates; get 3 written quotes, and bundle furnace and AC replacement with the same contractor to reduce markup. Consider manufacturer rebates and utility incentives to offset costs.
Salt Lake City Versus Rural Utah Price Differences
Urban areas like Salt Lake City and Provo typically run 5%–20% higher labor rates than rural Utah; expect a $200-$1,000 premium on full installs. Rural installs may have higher delivery fees but lower hourly labor rates.
| Market | Typical Delta vs Rural | Example Impact |
|---|---|---|
| Salt Lake City Metro | +10% to +20% | $600-$1,200 extra on average install |
| Ogden / Provo | +5% to +15% | $300-$900 extra |
| Rural Utah Counties | ±0% to -8% | Lower hourly rates, higher travel fees |
Typical Installation Time, Crew Size, And Labor Hours
Standard AirTemp full system replacement takes 6–12 hours with a 2‑person crew; add 10–20 hours for major ductwork or access issues. Labor hours commonly fall between 8 and 20 hours for full replace jobs.
Service calls and diagnostics are usually 1 hour on-site; emergency or after-hours rates can be 1.5× the normal $75-$125 hourly rate. Assumptions: single-story roof access, no structural modifications.
Common Add‑Ons, Repairs, And Parts That Increase Price
Frequent cost drivers: duct repairs ($4-$9 per sq ft), line set replacement ($150-$450 per ton), new electrical subpanel or disconnect ($400-$1,200). Replacing corroded furnace venting, upgrading thermostat to smart, or adding zoning can each add $300-$2,000.
Compressor warranty extensions and premium installation packages can raise the upfront price but may reduce long-term risk; always get itemized quotes for add-ons. Ask for separate line items for each add-on to compare apples to apples.