The American Standard Allegiance 13 price typically ranges from $2,800 to $5,500 for a full replacement including installation; final cost varies by system size, SEER rating, and local labor. Buyers most often pay between $3,800-$4,500 for a 2-3 ton install with standard ductwork and basic permit needs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete Unit + Installation | $2,800 | $3,800-$4,500 | $5,500 | Assumptions: 2–3 ton, suburban U.S., standard ductwork |
| Equipment Only (unit) | $1,200 | $1,700 | $2,500 | Outdoor condensing unit + coil, no labor |
| Install Labor | $900 | $1,500 | $2,200 | |
| Permit / Misc | $50 | $150 | $400 | Local permit and disposal fees |
Typical Total Price For Replacing an Allegiance 13 in a 2–3 Ton Home
Most homeowners replacing an American Standard Allegiance 13 in a typical 1,200–2,000 sq ft home pay $3,800-$4,500 including the outdoor condensing unit, indoor coil, standard installation, and basic warranty registration.
This range assumes a matched 2–3 ton system, normal attic or crawlspace access, and mid-range installer pricing.
Breakdown Of Major Quote Parts: Equipment, Labor, Permits, Disposal
Understand what each line on a contractor quote represents to compare offers accurately.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $1,200-$2,500 (unit, coil, refrigerant) | $900-$2,200 () | $200-$600 (mounts, pad, lineset) | $50-$400 (local) | $50-$300 (old unit hauling) |
Equipment cost drives the low-high spread while labor and access issues create the largest quote-to-quote variance.
How System Size, SEER Rating, and Duct Condition Affect Final Quotes
Upgrading from a 2 ton to a 3.5 ton or selecting higher SEER raises equipment cost: 2 ton units $1,200-$1,800; 3.5 ton units $1,800-$2,500. SEER 13 is baseline; moving to SEER 16-18 can add $500-$1,200.
Replacing or repairing ductwork adds $500-$4,000 depending on extent. Key numeric drivers: tonnage (2.0–5.0), SEER (13 vs 16+), and duct replacement linear footage (per 10–100 ft).
Practical Ways To Reduce American Standard Allegiance 13 Price
Control scope by installing only the outdoor condensing unit if indoor coil and ducting are compatible, which can save $700-$1,800 versus full replacement. Schedule replacements in spring or fall to avoid peak summer demand markups of 10%-25%.
Obtain three written quotes, request itemized bids, and avoid add-ons like premium filters or nonessential accessories to reduce the total.
Regional Price Differences Across the U.S. and Expected Percent Deltas
Expect regional deltas where the same Allegiance 13 replacement costs roughly 10%-20% more in coastal urban areas and 5%-10% less in interior rural markets. Example deltas: Northeast +12%, West Coast +18%, Midwest -7% relative to national average.
Labor intensity and permit fees explain most regional price shifts rather than equipment MSRP differences.
Common Add-Ons, Fees, and Site Complications That Increase the Quote
Typical add-ons: line set replacement $200-$600; electrical upgrade or new disconnect $150-$600; refrigerant recovery and recharge $100-$450; hard start kit $50-$150. Difficult access (multi-story roofs, narrow yards) adds $200-$1,000 in labor.
Ask contractors to list charges for line sets, electrical work, permits, and disposal separately to avoid surprise fees.
Three Real-World Quote Examples With Specs and Totals
| Scenario | Specs | Labor Hours | Per-Unit Rates | Total |
|---|---|---|---|---|
| Budget Replace | 2.0 ton, SEER 13, matched coil | 8-12 hours | Unit $1,200; Labor $900 | $2,800-$3,200 |
| Typical Job | 2.5–3.0 ton, SEER 13, minor duct repair | 12-18 hours | Unit $1,700; Labor $1,500 | $3,800-$4,500 |
| Premium Replacement | 3.5–4.0 ton, SEER 16, duct replacement | 18-30 hours | Unit $2,400; Labor $2,000 | $5,000-$6,500 |
These examples show how tonnage, SEER, and ductwork scale both labor hours and total price.