The Carrier Infinity 19VS price depends on unit capacity, installation complexity, and location; buyers typically pay between $3,800 and $9,500 installed. This article lists typical cost ranges, per‑ton pricing, and the major things that move a quote for the Carrier Infinity 19VS air conditioner or heat pump.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed 1.5‑3 Ton Unit | $3,800 | $5,800 | $9,500 | Assumptions: standard single‑family home, suburban installer, no major electrical work. |
| Per Ton Installed | $1,900 | $1,933-$2,800 | $3,167 | Assumptions: 1.5–4 ton units. |
| Outdoor Unit Only (Equipment) | $2,200 | $3,200 | $5,000 | Assumptions: select model, excludes coil, controls, freight. |
Installed Price For Carrier Infinity 19VS By Home Size And Tonnage
Expect a total installed price of about $3,800-$9,500 depending mainly on tonnage and ductwork condition.
Typical totals: 1.5–2 ton homes: $3,800-$5,500; 2.5–3 ton: $5,000-$7,200; 3.5–4 ton replacements or upgrades: $6,500-$9,500. Per‑ton equipment+install averages $1,900-$2,800 per ton for straightforward installs.
Assumptions: Midwest labor rates, standard evaporator coil, no major duct modifications, accessible outdoor pad.
Line‑Item Breakdown: Materials, Labor, Equipment, Permits, Delivery/Disposal
A realistic quote separates equipment, materials, labor, permits, and disposal so buyers can compare apples to apples.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $400-$1,200 (thermostat, fittings, coil) | $800-$2,200 () | $2,200-$5,000 (outdoor condensing unit) | $50-$300 | $75-$350 (old unit removal, freight) |
Assumptions: 4–10 labor hours, $75-$125 per hour, standard refrigerant charge included.
How SEER Rating, Ton Size, And Coil Match Affect Final Price
Higher SEER (efficiency) and matched indoor coil assemblies can add $600-$2,000 or more to equipment costs.
Carrier Infinity 19VS is a high‑efficiency variable‑speed model; upgrading from a mid‑SEER unit (13–16 SEER) to 19VS can increase equipment price by $1,000-$2,500. Choosing a larger tonnage adds roughly $900-$1,500 per additional half‑ton.
Also factor coil match: replacing outdoor unit without replacing an incompatible indoor coil can add $400-$1,200 later or require immediate coil replacement to maintain warranty.
Site Conditions That Raise Or Lower The Installer’s Quote
Cramped access, long refrigerant line runs, or required electrical upgrades are the most common site cost drivers.
Numeric thresholds that change price: line runs over 50 feet typically add $250-$800; electrical service upgrades (e.g., to 200A or adding a dedicated 30–60 amp circuit) add $800-$2,500; roof or second‑story condensers add $300-$1,200 for rigging.
Assumptions: normal suburban property; rural or hard‑to‑access sites often exceed these ranges.
Practical Ways To Lower Carrier Infinity 19VS Price Without Sacrificing Function
Buyers can reduce price by keeping existing compatible indoor equipment, scheduling off‑season installs, and getting multiple firm quotes.
Concrete tactics: keep a compatible coil if possible (saves $400-$1,200), accept a slightly lower accessory thermostat model ($100-$300 savings), schedule late fall or spring installs to avoid peak price premiums of $300-$900, and obtain 3 quotes to cut overhead padding.
Regional Price Variations Across The U.S. For Carrier Infinity 19VS
Expect 10%-30% regional variance; coastal and high‑cost metro areas are at the top end.
| Region | Low | Average | High |
|---|---|---|---|
| Northeast / Metro | $4,200 | $6,200 | $9,500 |
| Midwest / Suburban | $3,800 | $5,800 | $8,200 |
| South / High Cooling Demand | $4,000 | $6,000 | $9,000 |
| Rural / Low Labor | $3,500 | $5,200 | $7,500 |
Assumptions: regional labor differences, permitting complexity, and freight costs.
Three Real‑World Quote Examples With Specs And Labor Hours
Example quotes help match the right expectation to the reader’s home size and scope.
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Small 1.5‑2 Ton Replacement | 1.5T 19VS, existing coil OK | 4–6 hrs | $3,800-$5,200 |
| Mid 2.5‑3 Ton Replacement | 3T 19VS, new matched coil | 6–10 hrs | $5,500-$7,500 |
| Large 3.5‑4 Ton Complex Install | 4T 19VS, long line set, panel upgrade | 10–16 hrs | $7,800-$11,500 |
Assumptions: includes equipment, basic materials, disposal; excludes major duct replacement or structural rigging.