The Greenheck SP B110 price depends on configuration, motor size, and whether the unit is purchased bare or fully installed; buyers typically pay between $900 and $4,500 for the fan plus $300-$1,500 to install. Assumptions: U.S. pricing, single unit, standard commercial/industrial supply fan, ground-level access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit (bare) | $900 | $1,800 | $3,200 | Standard impeller, TEFC motor, no accessories |
| Unit (configured) | $1,200 | $2,500 | $4,500 | VFD, heavy-duty bearings, coated housing |
| Installation | $300 | $900 | $1,500 | Includes labor, basic wiring, mounting |
| Total Installed | $1,200 | $3,400 | $6,000 | Varies by region and site complexity |
What Buyers Usually Pay For A Greenheck SP B110 Fan
The base Greenheck SP B110 price for a stripped-down spare unit with a fractional-to-1.5 HP motor is commonly $900-$1,800; a fully optioned fan with larger motor, VFD, coating, and controls runs $2,200-$4,500. Typical installed totals range $1,200-$6,000 depending on equipment and site work.
Assumptions: 500-2,500 CFM duty, standard single inlet, factory-balanced impeller, U.S. lower-48 shipping.
Price Breakdown By Major Quote Components
Major invoice parts include the fan unit, motor upgrades, controls, shipping, mounting hardware, field labor, and disposal or site prep when needed. Understanding each line item helps compare vendor quotes accurately.
| Materials | Labor | Equipment | Delivery/Disposal | Warranty |
|---|---|---|---|---|
| $900-$3,200 | $300-$1,200 | $0-$800 | $0-$300 | $0-$400 |
Assumptions: Materials include motor and standard mounting; equipment may include lifts or specialty rigging.
How Motor Size, VFD, And CFM Change The Final Quote
Motor horsepower and CFM are among the strongest price drivers: a 0.5-1.5 HP motor typically adds $0-$300, while 2-5 HP adds $400-$1,000; adding a VFD costs $600-$1,800. Move from 1,000 CFM to 3,000 CFM often jumps the unit price by 30%-80% due to larger impellers and housings.
Numeric thresholds to watch: single-phase vs. three-phase power, motors above 5 HP often require special wiring and add $200-$700 in labor; inlet/outlet size jumps at 10-12 in. increase materials cost markedly.
Site Conditions That Drive Installation Labor And Costs
Access, mounting height, and required rigging change labor and equipment charges: ground-level installs take 1-3 hours ($75-$125 per hour), rooftop or mezzanine installs take 4-12 hours with lift rental ($75-$200 per hour plus $200-$800 lift). Restricted access or structural framing can add $500-$2,000 to the install price.
Assumptions: Local electricians $75-$125/hr; mechanical crew $75-$150/hr; lift rental 4-12 hours as required.
Practical Ways To Reduce Greenheck SP B110 Pricing On Purchase Or Installation
Buyers can lower the Greenheck SP B110 price by ordering standard factory configurations, avoiding onsite modifications, scheduling off-peak installation, and bundling multiple units. Requesting competing quotes, specifying standard motor frames, and providing clear access usually trims 10%-25% off the total.
Other tactics: accept standard paint instead of specialty coatings ($100-$600 saved), reuse existing duct flanges and hardware, and pre-order to avoid rush freight ($150-$600).
Regional Price Differences And Typical Percent Deltas
Prices vary by region: Pacific Coast and Northeast generally run 5%-20% higher than Midwest and Southeast due to labor and freight. Expect a 10%-15% premium in urban coastal areas versus rural Midwest on comparable quotes.
| Region | Typical Price Delta vs Midwest | Notes |
|---|---|---|
| Midwest | 0% | Baseline labor and freight |
| Northeast | +8% to +20% | Higher labor and permit costs |
| Pacific Coast | +10% to +25% | Higher freight, wages |
| South/Southeast | -5% to +5% | Moderate labor, lower freight inland |
Common Add‑Ons, Lead Times, And Quote Examples
Typical add-ons include vibration isolation $80-$400, coated housings $150-$600, smoke dampers or controls $300-$1,200, and expedited freight $150-$800. Expect lead times 2-6 weeks for standard builds; custom coatings or specialty motors push to 6-12 weeks.
| Example | Specs | Labor Hours | Total Price |
|---|---|---|---|
| Budget Unit | 0.75 HP, standard paint, 1,000 CFM | 2 hrs | $1,200 |
| Mid Spec | 2 HP, VFD, coated, 2,500 CFM | 6 hrs | $3,600 |
| Heavy Duty | 5 HP, three-phase, heavy coating, rooftop | 10 hrs + lift | $6,000 |
Assumptions: Quotes include basic mounting and electrical tie-in; prices exclude major structural work.