Quietr duct board price and installation cost vary widely by board thickness, job size, and regional labor rates. Buyers usually pay $X-$Y per linear foot for material and $A-$B per hour for installation depending on access and fittings; this article breaks down realistic U.S. pricing and the main price drivers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Quietr duct board material (per sq ft) | $1.25 | $1.75 | $2.50 | Assumptions: 1″, 2″ and 3″ thickness common, standard density. |
| Fabricated duct sections (per linear ft) | $8 | $12 | $22 | Includes seams, liners; depends on diameter and fittings. |
| Installation labor (per hour) | $65 | $95 | $140 | Assumptions: 2-person crew, residential access. |
| Typical small HVAC job (total) | $650 | $1,450 | $3,200 | 1–3 supply runs, 50–150 sq ft of board. |
Material Price Buyers Pay For Quietr Duct Board
Typical Quietr duct board material costs run about $1.25-$2.50 per square foot depending on thickness and acoustic grade. Thinner 1″ boards are at the low end; 2″–3″ acoustic grades and foil-faced options push toward the higher end. Assumptions: Midwest supplier, standard 4×8 sheets or custom-cut pieces.
Breaking Down the Quote: Materials, Labor, Equipment, Delivery
A full quote usually separates material, fabrication, on-site labor, equipment rental, and delivery/disposal fees.
| Materials | Labor | Equipment | Delivery/Disposal |
|---|---|---|---|
| $1.25-$2.50 per sq ft (board); $3-$8 per fitting | $65-$140 per hour; 2-person crew typical | $50-$200 per day (lifts, cutters) | $50-$350 depending on distance and waste) |
How Job Size Affects Total Price for a Typical Home
Small repairs or single-run replacements (50–150 sq ft) usually cost $650-$1,450 total; whole-house duct board replacement (300–1,000 sq ft) typically costs $3,000-$9,000. Larger jobs require more fabrication time and often a small crew for several days, increasing overhead and possible permit fees. Assumptions: standard 2″ board, typical single-story home access.
Which Technical Specs Drive Higher Quotes
Thickness, acoustic rating, and facing type are the strongest material drivers—moving from 1″ to 3″ can raise material cost by 40%-100%. Two niche-specific drivers: board thickness (1″ vs 2″ vs 3″) and facing (plain vs foil-faced). Numeric thresholds: 1″ boards ~ $1.25-$1.50/sq ft; 2″ boards ~ $1.60-$2.00/sq ft; 3″ acoustic boards ~ $2.00-$2.50/sq ft. Foil-faced or fire-rated boards add $0.20-$0.60 per sq ft.
Site Conditions That Change Labor and Equipment Fees
Tight attic access, high ceilings, or long duct runs can double labor hours and require lifts, adding $100-$400 to the job. Examples: attic work with limited access often costs an extra $200-$600 due to slower progress; rooftop runs requiring scaffolding or lifts add $150-$450 for equipment rental and safety setup.
Practical Ways To Lower Quietr Duct Board Price
Controlling scope, choosing 2″ instead of 3″ where acoustics allow, and doing prep work (clearing attic access, removing old insulation) can cut the installed cost by 10%-30%. Additional tactics: get three written quotes, schedule work in shoulder seasons for lower labor demand, accept bulk delivery to reduce per-unit freight, and reuse straight duct sections where code and condition allow.
Sample Real-World Quotes With Specs and Totals
Three representative quotes help set expectations for different job sizes and specs.
| Scenario | Specs | Labor Hours | Material + Labor |
|---|---|---|---|
| Small repair | 60 sq ft, 1″ board, 2 fittings | 4-6 hours | $650-$850 |
| Basement remodel runs | 180 sq ft, 2″ board, several transitions | 12-20 hours | $1,800-$3,100 |
| Whole-system replace | 650 sq ft, mix 2″/3″, custom plenums | 40-80 hours | $4,500-$9,200 |
Seasonal and Regional Price Differences To Expect
Costs are typically 10%-25% higher in coastal and high-cost metro areas and can be 5%-15% lower in rural Midwestern markets. Peak HVAC seasons (summer and early fall) increase labor rates and lead times; scheduling in late winter or spring can yield lower quotes and faster scheduling. Assumptions: percentage deltas based on typical U.S. labor market variation.